PCM 621


Terminal Blocks 10 Amp Each

The Power Control Module “PCM621” amp is a quad DC power relay designed to work in conjunction with any Serial interface, However the device has additional features when used with a CDI Secure Out of Band Management device. The purpose of the device is to remotely power reset DC devices that are in a “locked up” condition.

The PCM621 will interrupt the power to a connected device when it is commanded to “switch off” the power relay to that particular output connector. The PCM621 can “reboot” the connected device by interrupting the power for a few seconds, or it can turn off the device off for longer periods of time.

DC SERIAL Power Control Module Remotely Power Cycle DC Equipment with SERIAL Commands.

  • Serial Control
  • Daisy Chain Multiple units
  • Four Devices
  • 5VDC ~48VDC 10 AMP
  • “Always On” Default
  • LED status indicator
  • 1 Screw-less Terminals
  • 4 x Terminal Blocks
  • ROHS Compliant


Rackmount 701 with 2 PCM621 devices
Link Devices with Serial connection for More BC Terminal Blocks

110/240VAC 10 AMP

Dimensions: w 8.5” d 3.1” h 1.7”
Weight: 2.5 Lbs
Part #: PCM 621

Retainer Clips with Tie Wraps