PA100 Series FAQ’s

Our hardware supports ANY software platform. Our management system supports Windows , W7 Pro 32/64, Server 2008,2008R2, 2016  SQL 2008,2012.2014. The system can run as a VM-Slice. We recommend installing on a server so that multiple users can access simultaneously. The system can be installed on a desktop for smaller installations.

Yes. OBM also combines with a built in intelligent SSH terminal that can automatically build the outbound connection to the device by just clicking the device icon in the OBM system. This will also get keystroke logged in the OBM log database for later forensic retrieval.

 

Yes. You can also tie the OBM into your Active Directory domain.

Yes the OBM will automatically log ALL keystroke data of an engineer’s session which will be stored on the secure server for later retrieval by a security administrator for audit.

The default address of the network interface is 199.199.199.1. As long as an IP address has not already been configured in the product you can use a web browser to change the IP address. You can also connect a SERIAL cable to the console interface and access config menus using the administrator password.

As long as an IP address has not already been configured in the product you can use a serial connection to the CDI console port to configure an IP address in the CDI device. The default is 8/n/1 9600 baud.

Load More

PA200 Series FAQ’s

Our hardware supports ANY software platform. Our management system supports Windows , W7 Pro 32/64, Server 2008,2008R2, 2016  SQL 2008,2012.2014. The system can run as a VM-Slice. We recommend installing on a server so that multiple users can access simultaneously. The system can be installed on a desktop for smaller installations.

Yes. OBM also combines with a built in intelligent SSH terminal that can automatically build the outbound connection to the device by just clicking the device icon in the OBM system. This will also get keystroke logged in the OBM log database for later forensic retrieval.

 

Yes. You can also tie the OBM into your Active Directory domain.

Yes the OBM will automatically log ALL keystroke data of an engineer’s session which will be stored on the secure server for later retrieval by a security administrator for audit.

The default address of the network interface is 199.199.199.1. As long as an IP address has not already been configured in the product you can use a web browser to change the IP address. You can also connect a SERIAL cable to the console interface and access config menus using the administrator password.

As long as an IP address has not already been configured in the product you can use a serial connection to the CDI console port to configure an IP address in the CDI device. The default is 8/n/1 9600 baud.

Load More

Enterprise Software FAQ’s

Our hardware supports ANY software platform. Our management system supports Windows , W7 Pro 32/64, Server 2008,2008R2, 2016  SQL 2008,2012.2014. The system can run as a VM-Slice. We recommend installing on a server so that multiple users can access simultaneously. The system can be installed on a desktop for smaller installations.

Yes. OBM also combines with a built in intelligent SSH terminal that can automatically build the outbound connection to the device by just clicking the device icon in the OBM system. This will also get keystroke logged in the OBM log database for later forensic retrieval.

 

Yes. You can also tie the OBM into your Active Directory domain.

Yes the OBM will automatically log ALL keystroke data of an engineer’s session which will be stored on the secure server for later retrieval by a security administrator for audit.

The default address of the network interface is 199.199.199.1. As long as an IP address has not already been configured in the product you can use a web browser to change the IP address. You can also connect a SERIAL cable to the console interface and access config menus using the administrator password.

As long as an IP address has not already been configured in the product you can use a serial connection to the CDI console port to configure an IP address in the CDI device. The default is 8/n/1 9600 baud.

Load More

Security Related FAQ’s

Our hardware supports ANY software platform. Our management system supports Windows , W7 Pro 32/64, Server 2008,2008R2, 2016  SQL 2008,2012.2014. The system can run as a VM-Slice. We recommend installing on a server so that multiple users can access simultaneously. The system can be installed on a desktop for smaller installations.

Yes. OBM also combines with a built in intelligent SSH terminal that can automatically build the outbound connection to the device by just clicking the device icon in the OBM system. This will also get keystroke logged in the OBM log database for later forensic retrieval.

 

Yes. You can also tie the OBM into your Active Directory domain.

Yes the OBM will automatically log ALL keystroke data of an engineer’s session which will be stored on the secure server for later retrieval by a security administrator for audit.

The default address of the network interface is 199.199.199.1. As long as an IP address has not already been configured in the product you can use a web browser to change the IP address. You can also connect a SERIAL cable to the console interface and access config menus using the administrator password.

As long as an IP address has not already been configured in the product you can use a serial connection to the CDI console port to configure an IP address in the CDI device. The default is 8/n/1 9600 baud.

Load More

Power Control FAQ’s

Our hardware supports ANY software platform. Our management system supports Windows , W7 Pro 32/64, Server 2008,2008R2, 2016  SQL 2008,2012.2014. The system can run as a VM-Slice. We recommend installing on a server so that multiple users can access simultaneously. The system can be installed on a desktop for smaller installations.

Yes. OBM also combines with a built in intelligent SSH terminal that can automatically build the outbound connection to the device by just clicking the device icon in the OBM system. This will also get keystroke logged in the OBM log database for later forensic retrieval.

 

Yes. You can also tie the OBM into your Active Directory domain.

Yes the OBM will automatically log ALL keystroke data of an engineer’s session which will be stored on the secure server for later retrieval by a security administrator for audit.

The default address of the network interface is 199.199.199.1. As long as an IP address has not already been configured in the product you can use a web browser to change the IP address. You can also connect a SERIAL cable to the console interface and access config menus using the administrator password.

As long as an IP address has not already been configured in the product you can use a serial connection to the CDI console port to configure an IP address in the CDI device. The default is 8/n/1 9600 baud.

Load More

Technical FAQ’s

Our hardware supports ANY software platform. Our management system supports Windows , W7 Pro 32/64, Server 2008,2008R2, 2016  SQL 2008,2012.2014. The system can run as a VM-Slice. We recommend installing on a server so that multiple users can access simultaneously. The system can be installed on a desktop for smaller installations.

Yes. OBM also combines with a built in intelligent SSH terminal that can automatically build the outbound connection to the device by just clicking the device icon in the OBM system. This will also get keystroke logged in the OBM log database for later forensic retrieval.

 

Yes. You can also tie the OBM into your Active Directory domain.

Yes the OBM will automatically log ALL keystroke data of an engineer’s session which will be stored on the secure server for later retrieval by a security administrator for audit.

The default address of the network interface is 199.199.199.1. As long as an IP address has not already been configured in the product you can use a web browser to change the IP address. You can also connect a SERIAL cable to the console interface and access config menus using the administrator password.

As long as an IP address has not already been configured in the product you can use a serial connection to the CDI console port to configure an IP address in the CDI device. The default is 8/n/1 9600 baud.

Load More

Pre-Purchase FAQ’s

Our hardware supports ANY software platform. Our management system supports Windows , W7 Pro 32/64, Server 2008,2008R2, 2016  SQL 2008,2012.2014. The system can run as a VM-Slice. We recommend installing on a server so that multiple users can access simultaneously. The system can be installed on a desktop for smaller installations.

Yes. OBM also combines with a built in intelligent SSH terminal that can automatically build the outbound connection to the device by just clicking the device icon in the OBM system. This will also get keystroke logged in the OBM log database for later forensic retrieval.

 

Yes. You can also tie the OBM into your Active Directory domain.

Yes the OBM will automatically log ALL keystroke data of an engineer’s session which will be stored on the secure server for later retrieval by a security administrator for audit.

The default address of the network interface is 199.199.199.1. As long as an IP address has not already been configured in the product you can use a web browser to change the IP address. You can also connect a SERIAL cable to the console interface and access config menus using the administrator password.

As long as an IP address has not already been configured in the product you can use a serial connection to the CDI console port to configure an IP address in the CDI device. The default is 8/n/1 9600 baud.

Load More