SEARCH
 SIGN UP FOR CDI NEWSLETTER

HOME SOLUTIONS PRODUCTS SUPPORT ABOUT CDI RESOURCES NEWS & EVENTS CONTACT US
 

Power Control Modules

 

This device when connected to the Uniguard or Port Authority will allow the CDI device to power reset a remote server, router, or other network element. The Network element can be power recycled for a predetermined number of seconds or can be shut of all together. There are US and International Power Control Modules available as well as 10 and 20 amp versions. The UniGuard can control one of these PCM's, whilethe Port Authority can control up to 8.

 

 

General Information

The Power control Modules come in four models, In Line (110VAC/10A, 220VAC/6A) and in line High Amperage (110VAC/16A, 220VAC/16A). The devices use IEC connectors to provide power connection through standard detached line cords. This allows for separate power circuits to be used and consumes only one outlet per device.

A Male/Female IEC power cord is included to connect the In-line module to the attached device. Mounting Brackets are also available for the in line modules as well as a Dual PCM Adapter. The Dual PCM Adapter allows two PCM's to be controlled from one port on a CDI device. This allows redundant supply devices to be reset with one command and port. This also doubles the number of controlled outlets per CDI device.

Features

  • Remotely disconnect and reconnect AC power

Order Info

PCM-US-2 Power Control Module Wall Mount 16AMP (US 115vac) Power cord included
PCM-US-3 Power Control Module Inline 10AMP (US 120vac) Power cord included
PCM-EU-4 Power Control Module Inline 16AMP (EU 230vac type). Power cord included
PCM-EU-6 Power Control Module Inline 6AMP (EU 230vac type). Power cord included

 

Specs

  • L-5.6in W-2.8in H-1.8in
  • 110VAC 50/60Hz 10AMP
  • 110VAC 50/60Hz 16AMP
  • 220VAC 50Hz 6AMP
  • 220VAC 50Hz 16AMP